Home > River Rock > San Gabriel River Cobble >

San Gabriel River Cobble 4"- 8" Pallet 2,000 Lbs
San Gabriel River Cobble 4" - 8" - Decorative Stone
San Gabriel River Cobble 4" - 8"
 
Call or Email us for a shipping quote
$34.99 will be added for each palletized or bagged material
Price Per Ton $349.99 Southern California Quarry
Inflation Fighter Sale $249.99
Savings: $100.00
Material Type: Cobblestone
Level Of Experience Required: No experience to install in gardens & landscapes by DIY's with a good design. For walls it is best to employ a mason.
Typical Time Required: Man hours will vary according to actual scope of work and purchase
Equipment Needed: A tree dolly for boulders 275 lbs or smaller, small tractor or crane for specimen material
Additional Materials Needed: Decomposed granite, gravel or small stones or rocks to accent the boulder. Cement or mortar if part of complex masonry project

Quantity in Stock:99

Availability:: Usually Ships in 24 to 48 Hours
Product Code: 82107CBX400X800PLTWB
Qty:

Description Material Transport Photos & Liability
 
San Gabriel River Cobble 4"- 8" Pallet Wire Basket Per Ton
Pallets are 2,000 pounds each
Southern California River Rock Quarry
Similar in color to Sierra River Rock but with more colors and rounded material. This rock is quarried from the river waters flowing out of the San Gabriel and San Bernardino Mountains. This river rock cobble is a mixture of rounded and angular material that is mostly made up of the colors silver, grey, some tan, and lesser colors.
San Gabriel River Cobble
Product Specifications and Uses
Great for landscaping parkstrips, dry river beds, and general landscaping.
Can be used for:
Dry creek effects
Wet creek effects
Drainage areas
Flood basins
Rock blankets

One yard of river cobbles covers:

300 square feet - 1 layer deep. This is too shallow you will see the soil or weed fabric
150 square feet - 2 layers and this works well but is ideal with a 1" deep layer of D.G. or smaller river rock under this rock.
100 square feet - 3" layer deep
75 square feet - 4" layer deep
60 square feet - 5" layer deep
50 square feet - 6" layer deep
42 square feet - 7" layer deep
37 square feet - 8" layer deep

Recommended rule:
The rule of thumb with rocks is to install a rock at least twice the size of the rock not going any less than 2" deep when using small rocks. With a rock that ranges in size from about 2" - 7", average the range at 4 1/2" but understand that with such a wide range of sizes the depth necessary to cover complete ground coverage could vary. We would recommend installing depths between 7 - 10 inches. Going less or basing your measurements on less depth will likely show the bare ground beneath the rock or running short. You are welcome to place rock deeper than the minimum recommended.



Share your knowledge of this product. Be the first to write a review »